HEAD OFFICE / FACTORY

PLO 464, Jln Gangsa, Zone 11,
Pasir Gudang Industrial Estate,
81700 Johor, Malaysia.
T 607-251 8555
F 607-251 8855
E whcisb@whitehorse.com.my

FACTORY 2

PLO 29, Tanjung Langsat
Industrial Estate, 81700
Pasir Gudang Johor, Malaysia.
T 607-256 3888
F 607-256 3757


FROM CONCEPT AND DESIGN TO INSTALLATION
    DETERMINE
  • Any special treatment needed for the area that needs to be tiled such as water proofing, special bedding or leveling of the base.
  • Width of joint and type of grout needed.

    ORGANIZE & CHECK
  • The straightness of floor and walls.
  • The tiles for the different subsize and shades.
  • The sequence of the whole thing tilling job.

    LAYING OUT
  • Dry-lay the tiles first to minimize the number of cut tiles and to ensure that the shades are harmonious.
  • Mark the working lines using the wall as a guide.
  • Apply the adhesives according to the manufacture’s instructions.
  • Carefully lay the tiles section by section, leveling each with its neighbour.
  • Lay the border tiles, leave a grout line between the border tiles and the wall.

    COMMON DESIGNS
  • Different colour of the same size, shape and finishing.
  • Different sized or shaped tiles with the same colour and finishing.
  • Different surface textures with the same colour.
  • Mural design using mosaic tiles.

    • PLANNING
  • You should study and determine the environment of the area in which the tiles are to be installed and the technical characteristics of the tiles required.

 
Copyright©2006 WHITE HORSE CERAMIC INDUSTRIES SDN BHD (216824-X). All rights reserved
(WHCISB is a wholly owned subsidiary of White Horse Berhad, which is listed on the Main Market of Bursa Malaysia)
| FeedBack | Sitemap |